Makita 18V LXT BRUSHLESS COMBI & 101 BITSET 1900 RPM 1.4 g

• 3 modes for drilling, hammer drilling, screwdriving
• 20 torque settings plus drill mode
• 2 mechanical speeds; high speed mode and low speed mode
• 13mm single sleeve keyless chuck
• LED job light with pre-glow and afterglow functions
• Trigger lock function at neutral position
• 13mm maximum drilling diameter in masonry, 13mm in steel, 38mm in wood with auger bit, 38mm in wood with self-feeding bit, 51mm in wood with hole saw and 70mm in siding board

The DHP490SFX2 is a compact and lightweight cordless Combi Drill, powered by 18V Li-ion LXT slide type battery, to supply energy to the powerful 18V brushless motor, with variable speed controlled by trigger and 2 mechanical gears, to deliver 0-1,900 / 0-500 rpm, 0-28,500 / 0-7,500 ipm, 65 Nm maximum torque, 50 Nm maximum fastening torque hard joint, 27 Nm maximum fastening torque soft joint and 460W maximum output power for a wide range of applications. The DHP490SFX2 is ideal for confined and narrow spaces, equipped with 3 modes for drilling, hammer drilling and screwdriving, 20 torque settings, 2 mechanical speeds; high speed mode for light duty applications and low speed mode for heavy duty applications, 13mm single sleeve keyless chuck with a 1.5 to 13mm chuck capacity, LED job light with pre-glow and afterglow functions, reverse switch and electric brake. The DHP490SFX2 has a trigger lock function at neutral position. 13mm maximum drilling diameter in masonry, 13mm in steel, 38mm in wood with auger bit, 38mm in wood with self-feeding bit, 51mm in wood with hole saw and 70mm in siding board. The DHP490SFX2 is supplied with a 101 piece drill bit set. DHP490SFX2 is not compatible with G-Series batteries.

• manual pdf
• Safety Data Sheet