{"product_id":"planet-igs-4215-4p4t2s-network-switch-managed-l2l4-gigabit-ethernet-101001000-power-over-ethernet-poe-blue-white","title":"PLANET IGS-4215-4P4T2S network switch Managed L2\/L4 Gigabit Ethernet (10\/100\/1000) Power over Ethernet (PoE) Blue, White","description":"\u003cdiv id=\"icepim-bulletpoints\"\u003e\u003cul\u003e\n\u003cli\u003ePhysical Port\u003c\/li\u003e\n\u003cli\u003e8-port 10\/100\/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at\/af PoE Injector (Port-1 to Port-4)\u003c\/li\u003e\n\u003cli\u003e2 100\/1000BASE-X mini-GBIC\/SFP slots, SFP type auto detection\u003c\/li\u003e\n\u003cli\u003eRJ45 console interface for switch basic management and setup\u003c\/li\u003e\n\u003cli\u003ePower over Ethernet\u003c\/li\u003e\n\u003cli\u003eComplies with IEEE 802.3at Power over Ethernet Plus, end-span PSE\u003c\/li\u003e\n\u003cli\u003eBackward compatible with IEEE 802.3af Power over Ethernet\u003c\/li\u003e\n\u003cli\u003eUp to 4 ports of IEEE 802.3af\/802.3at devices powered\u003c\/li\u003e\n\u003cli\u003eSupports PoE power up to 36 watts for each PoE port\u003c\/li\u003e\n\u003cli\u003eAuto detects powered device (PD)\u003c\/li\u003e\n\u003cli\u003eCircuit protection prevents power interference between ports\u003c\/li\u003e\n\u003cli\u003eRemote power feeding up to 100 meters in standard mode and 250m in extend mode\u003c\/li\u003e\n\u003cli\u003ePoE management\u003c\/li\u003e\n\u003cli\u003eTotal PoE power budget control\u003c\/li\u003e\n\u003cli\u003ePer port PoE function enable\/disable\u003c\/li\u003e\n\u003cli\u003ePoE port power feeding priority\u003c\/li\u003e\n\u003cli\u003ePer PoE port power limitation\u003c\/li\u003e\n\u003cli\u003ePD classification detection\u003c\/li\u003e\n\u003cli\u003ePD alive-check\u003c\/li\u003e\n\u003cli\u003ePoE schedule\u003c\/li\u003e\n\u003cli\u003eIndustrial Case \u0026amp; Installation\u003c\/li\u003e\n\u003cli\u003eIP30 aluminum case\u003c\/li\u003e\n\u003cli\u003eDIN-rail and wall-mount design\u003c\/li\u003e\n\u003cli\u003eSupports -40 to 75 degrees C operating temperature\u003c\/li\u003e\n\u003cli\u003eSupports ESD 6KV DC Ethernet protection\u003c\/li\u003e\n\u003cli\u003eRedundant power design\u003c\/li\u003e\n\u003cli\u003e48V~56V DC wide power input with reverse polarity protection\u003c\/li\u003e\n\u003cli\u003eProvides one relay output for power failure\u003c\/li\u003e\n\u003cli\u003eSwitching\u003c\/li\u003e\n\u003cli\u003eHardware based 10\/100Mbps (half\/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI\/MDI-X\u003c\/li\u003e\n\u003cli\u003eFeatures Store-and-Forward mode with wire-speed filtering and forwarding rates\u003c\/li\u003e\n\u003cli\u003eIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation\u003c\/li\u003e\n\u003cli\u003e8K MAC address table size\u003c\/li\u003e\n\u003cli\u003e10K jumbo frame\u003c\/li\u003e\n\u003cli\u003eAutomatic address learning and address aging\u003c\/li\u003e\n\u003cli\u003eSupports CSMA\/CD protocol\u003c\/li\u003e\n\u003cli\u003eLayer 2 Features\u003c\/li\u003e\n\u003cli\u003eSupports VLAN\u003c\/li\u003e\n\u003cli\u003eIEEE 802.1Q tagged VLAN\u003c\/li\u003e\n\u003cli\u003eProvider bridging (VLAN Q-in-Q, IEEE 802.1ad) support\u003c\/li\u003e\n\u003cli\u003eProtocol VLAN\u003c\/li\u003e\n\u003cli\u003eVoice VLAN\u003c\/li\u003e\n\u003cli\u003ePrivate VLAN (Protected port)\u003c\/li\u003e\n\u003cli\u003eManagement VLAN\u003c\/li\u003e\n\u003cli\u003eGVRP\u003c\/li\u003e\n\u003cli\u003eSupports Spanning Tree Protocol\u003c\/li\u003e\n\u003cli\u003eSTP (Spanning Tree Protocol)\u003c\/li\u003e\n\u003cli\u003eRSTP (Rapid Spanning Tree Protocol)\u003c\/li\u003e\n\u003cli\u003eMSTP (Multiple Spanning Tree Protocol)\u003c\/li\u003e\n\u003cli\u003eSTP BPDU Guard, BPDU Filtering and BPDU Forwarding\u003c\/li\u003e\n\u003cli\u003eSupports Link Aggregation\u003c\/li\u003e\n\u003cli\u003eIEEE 802.3ad Link Aggregation Control Protocol (LACP)\u003c\/li\u003e\n\u003cli\u003eCisco ether-channel (static trunk)\u003c\/li\u003e\n\u003cli\u003eMaximum 4 trunk groups, up to 4 ports per trunk group\u003c\/li\u003e\n\u003cli\u003eProvides port mirror (many-to-1)\u003c\/li\u003e\n\u003cli\u003eLoop protection to avoid broadcast loops\u003c\/li\u003e\n\u003cli\u003eQuality of Service\u003c\/li\u003e\n\u003cli\u003eIngress\/Egress Rate Limit per port bandwidth control\u003c\/li\u003e\n\u003cli\u003eTraffic classification\u003c\/li\u003e\n\u003cli\u003eIEEE 802.1p CoS- TOS\/DSCP\/IP precedence of IPv4\/IPv6 packets\u003c\/li\u003e\n\u003cli\u003eStrict priority and Weighted Round Robin (WRR) CoS policies\u003c\/li\u003e\n\u003cli\u003eMulticast\u003c\/li\u003e\n\u003cli\u003eSupports IPv4 IGMP snooping v2, v3\u003c\/li\u003e\n\u003cli\u003eSupports IPv6 MLD snooping v1, v2\u003c\/li\u003e\n\u003cli\u003eIGMP querier mode support\u003c\/li\u003e\n\u003cli\u003eIGMP snooping port filtering\u003c\/li\u003e\n\u003cli\u003eMLD snooping port filtering\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cdiv id=\"icepim-long-desc\"\u003e\u003cp id=\"ice_long_description\"\u003e\u003cb\u003eIdeal, Cost-effective, Manageable PoE Solution for Hardened Environment\u003c\/b\u003e\u003cbr\u003eDesigned to be installed in heavy industrial demanding environments, the IGS-4215-4P4T2S is the new generation of PLANET Industrial-grade, DIN-rail type L2\/L4 Managed Gigabit PoE+ Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6\/IPv4 dual stack management and built-in L2\/L4 Gigabit switching engine along with 4 10\/100\/1000BASE-T ports featuring 30-watt 802.3at PoE+, 4 additional Gigabit copper ports and another 2 extra 100\/1000BASE-X SFP fiber slots for data and video uplink. The IGS-4215-4P4T2S is able to operate reliably, stably and quietly in any environment without affecting its performance. It comes with a total power budget of up to 144 watts for different kinds of PoE applications and operating temperature ranging from -40 to 75 degrees C in a rugged IP30 metal housing.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBuilt-in Unique PoE Functions for Powered Devices Management\u003c\/b\u003e\u003cbr\u003eAs it is the managed PoE switch for surveillance, wireless and VoIP networks, the IGS-4215-4P4T2S features the following special PoE management functions:\u003cbr\u003e- PD alive check\u003cbr\u003e- Scheduled power recycling\u003cbr\u003e- PoE schedule\u003cbr\u003e- PoE usage monitoring\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntelligent Powered Device Alive Check\u003c\/b\u003e\u003cbr\u003eThe IGS-4215-4P4T2S can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the IGS-4215-4P4T2S will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eScheduled Power Recycling\u003c\/b\u003e\u003cbr\u003eThe IGS-4215-4P4T2S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePoE Schedule for Energy Saving\u003c\/b\u003e\u003cbr\u003eUnder the trend of energy saving worldwide and contributing to environmental protection, the IGS-4215-4P4T2S can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePoE Usage Monitoring and Intelligent LED Indicator for Real-time PoE Usage\u003c\/b\u003e\u003cbr\u003eVia the power usage chart in the web management interface, the IGS-4215-4P4T2S enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities. Moreover, the IGS-4215-4P4T2S helps users to monitor the current status of PoE power usage easily and efficiently via its advanced LED indication. Called “PoE Power Usage”, the front panel of the IGS-4215-4P4T2S has four LED indicators of different power usages.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eEnvironmentally Hardened Design\u003c\/b\u003e\u003cbr\u003eWith the IP30 aluminum industrial case, the IGS-4215-4P4T2S provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioner. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-4215-4P4T2S can be placed in almost any difficult environment.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIPv6\/IPv4 Dual Stack Management\u003c\/b\u003e\u003cbr\u003eSupporting both IPv6 and IPv4 protocols, the IGS-4215-4P4T2S helps the system integrators to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 network is set up.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eRobust Layer 2 Features\u003c\/b\u003e\u003cbr\u003eThe IGS-4215-4P4T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop and BPDU Guard, IGMP Snooping, and MLD Snooping. Via the link aggregation, the IGS-4215-4P4T2S allows the operation of a high-speed trunk to combine with multiple ports such as a 16Gbps fat pipe, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eEfficient Traffic Control\u003c\/b\u003e\u003cbr\u003eThe IGS-4215-4P4T2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast\/multicast\/unicast storm control, per port bandwidth control, 802.1p\/CoS\/IP DSCP QoS priority and remarking. It guarantees the best performance in VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFriendly and Secure Management\u003c\/b\u003e\u003cbr\u003eFor efficient management, the IGS-4215-4P4T2S is equipped with web, Telnet and SNMP management interfaces. With the built-in web-based management interface, the IGS-4215-4P4T2S offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet. Moreover, the IGS-4215-4P4T2S offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAdvanced Network Security\u003c\/b\u003e\u003cbr\u003ePLANET IGS-4215-4P4T2S offers a comprehensive IPv4\/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, the IGS-4215-4P4T2S also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discarded ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFlexibility and Long-distance Extension Solution\u003c\/b\u003e\u003cbr\u003eThe two mini-GBIC slots built in the IGS-4215-4P4T2S support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX\/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to 10\/20\/30\/40\/50\/60\/70\/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntelligent SFP Diagnosis Mechanism\u003c\/b\u003e\u003cbr\u003eThe IGS-4215-4P4T2S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.\u003c\/p\u003e\u003c\/div\u003e\u003cdiv id=\"icepim-pdf-urls\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.iceshop.nl\/objects\/mmo_30732832_1482306103_0875_639.pdf\" target=\"_blank\"\u003emmo_30732832_1482306103_0875_639.pdf\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"Planet","offers":[{"title":"Default Title","offer_id":59801833701457,"sku":"IGS-4215-4P4T2S","price":423.64,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/0036\/4881\/files\/020cbaec70aa28b4e660570125e0c522.jpg?v=1784034002","url":"https:\/\/backtotheoffice.ie\/products\/planet-igs-4215-4p4t2s-network-switch-managed-l2l4-gigabit-ethernet-101001000-power-over-ethernet-poe-blue-white","provider":"Back to the Office Ireland","version":"1.0","type":"link"}